It is possible to have this vehicle upgraded by Tesla, so that it instead uses the same sensors as the later model year versions. If the vehicle has been upgraded, please select the later model variant.
Make: | Tesla |
Model: | Model S |
Model Code: | 5YJS |
Date of Manufacture: | May 2013 - July 2014 |
OE Sensor Manufacturer: | BAOLONG |
OE Sensor Number: | FS15I1 |
The following sensors are all compatible with: Tesla Model S 2013-2014.
72-20-341
Baolong Classic Clamp-In Sensor
Tesla OE replacement sensor.
Barcode: 5055563002799
Comparative Part Numbers: TEC-S107, 3901-B, 6004985, FS15I1,
72-21-935
Intellisens Clamp-In Sensor
HUF configurable Intellisens 4040 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
Barcode: 5055563028720
72-21-936
Intellisens Snap-In Sensor
HUF configurable Intellisens 4041 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
72-21-958
Intellisens Clamp-In Sensor
72-21-959
Intellisens Snap-In Sensor
72-20-086
Alligator Sens.It Snap-In Sensor 433MHz
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
Barcode: 5055563003352
Comparative Part Numbers: 590918,
72-20-085
Alligator Sens.It Clamp-In Sensor 433MHz
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
Barcode: 5055563003345
Comparative Part Numbers: 590914,
Service parts for the Baolong Classic Clamp-In style sensor:
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.